Willkommen zurück!
eMail-Adresse
Passwort

AM 12 Dynacord Aktiv 2-Weg Monitorsystem 50W High 300W Low

AM 12 Dynacord Aktiv 2-Weg Monitorsystem 50W High 300W Low   AM 12 Dynacord Aktiv 2-Weg Monitorsystem 50W High 300W Low

AM 12 Dynacord Aktiv 2-Weg Monitorsystem 50W High 300W Low

Aktiv 2-Weg Monitorsystem, 360W

Die perfekte Plug&Play Monitorlösung für viele Anwendungen. Bestückt ist der AM 12 mit einem 12" Dynacord Woofer LFT 3008 und einem Constant Directivity Mittel-Hochtonhorn. Die eingebaute Fullrange-Endstufe in Class "H" Technik liefert 300W für den Lo-Kanal und der Hochtonverstärker 60W für den Hi-Kanal.

Durch vielfältige Anschluß- und Einstellmöglichkeiten (Mic, Line und Aux) und die Erweiterung mit der passiven Monitorbox AM 12 ist der Einsatz als komplette Monitoranlage bis hin zum kleinen PA-System möglich. Zusätzliche Werkzeuge bietet die ACOUSTIC PROCESSING Sektion: Der Lo-EQ ist ein justierbarer LPN-Filter zur Kontrolle des "Punch", mit dem MID-EQ, einem 4kHz DIP-Filter kann die "Aggressivität" des Horns zurückgenommen werden und mit dem HI-EQ die "Brillanz" nach Geschmack angehoben werden.


Technische Daten AM 12
Amplifiers at rated conditions, 4 ohms loads on fullrange- and 8 ohms loads on hf-amplifier,
acoustic control in 0-position, unless otherwise specified.
  Fullrange Amplifier High Frequency Amplifier
Minimum Load Impedance External Speaker 8 ohms -
Maximum Midband Output Power THD=1% 300W (1kHz) 50W (10kHz)
Rated Output Power THD< 0.2% 250W (100Hz - 20kHz) 40W (3kHz - 20kHz)
Max. Output Power Dynamic-Headroom, IHF-A 450W 60W
Maximum RMS Voltage Swing THD=1% 46.8V (1kHz) 23.3V (10kHz)
THD at rated output power, MBW=80kHz < 0.1% (1kHz) < 0.1% (10kHz)
IMD-SMPTE 60 Hz, 7 kHz < 0.2% -
DIM30 3.15 kHz, 15 kHz < 0.1% -
Frequency Response -1dB, ref. 1 kHz 30Hz - 30kHz 12.5kHz - 57kHz
Power Bandwith THD=1%, half power 14Hz - 20kHz 2kHz - 68kHz
Slew Rate 24V/µ s 17V/µ s
Signal to Noise Ratio A-weighted 104 dB 105dB
Power Consumption
at 1/8 maximum output power @ 4ohms
170W
Input Sensitivity at rated output power @ 1 kHz
MIC: - 34dBu
 
LINE : 0 dBu
 
AUX: -3dBu
Input Impedance 20Hz ... 20 kHz, balanced
MIC: 1.3kohms
 
LINE: > 10kohms
 
AUX: 8kohms (unbalanced)
Phantom Power
24V dc
Power Requirements
230V, 50Hz
Protection Audio limiters, High temperature, DC, HF, Back-EMF,
Peak current limiters, Inrush current limiters,
Turn-on delay, speaker protection
Cooling
convection cooled
Safety Class
I
Dimensions (W x H x D), mm
530.5 x 355 x 344
Weight
21kg

1.098,00 EUR

Artikeldatenblatt drucken
Art.Nr.: AM 12xA
Lieferzeit: 3-4 Tage (innerhalb Deutschland)
inkl. 19% MwSt
zzgl.
clickfabrik pro sale shop based on XT-CommerceeCommerce Engine © 2006 xt:Commerce Shopsoftware